FestinHegre/vendor/symfony/messenger/CHANGELOG.md

287 lines
18 KiB
Markdown
Raw Normal View History

2024-09-26 17:26:04 +02:00
CHANGELOG
=========
7.1
---
* `InMemoryTransportFactory` creates the `InMemoryTransport` with a clock (if configured in the factory)
* Add option `redis_sentinel` as an alias for `sentinel_master`
* Add `--all` option to the `messenger:consume` command
* Add parameter `$jitter` to `MultiplierRetryStrategy` in order to randomize delay and prevent the thundering herd effect
* Add `SIGQUIT` signal among list of signals that gracefully shut down `messenger:consume` and `messenger:failed:retry` commands
* Add `EnvelopeAwareExceptionInterface` for exceptions thrown from middlewares to prevent stamps added by previous middlewares being dropped
7.0
---
* Add parameter `$isSameDatabase` to `DoctrineTransport::configureSchema()`
* Remove `MessageHandlerInterface` and `MessageSubscriberInterface`, use `#[AsMessageHandler]` instead
* Remove `StopWorkerOnSigtermSignalListener` in favor of using the `SignalableCommandInterface`
* Remove `StopWorkerOnSignalsListener` in favor of using the `SignalableCommandInterface`
* Remove `Symfony\Component\Messenger\Transport\InMemoryTransport` and
`Symfony\Component\Messenger\Transport\InMemoryTransportFactory` in favor of
`Symfony\Component\Messenger\Transport\InMemory\InMemoryTransport` and
`Symfony\Component\Messenger\Transport\InMemory\InMemoryTransportFactory`
* Remove `HandlerFailedException::getNestedExceptions()`, `HandlerFailedException::getNestedExceptionsOfClass()`
and `DelayedMessageHandlingException::getExceptions()` which are replaced by a new `getWrappedExceptions()` method
6.4
---
* Deprecate `StopWorkerOnSignalsListener` in favor of using the `SignalableCommandInterface`
* Add `HandlerDescriptor::getOptions`
* Add support for multiple Redis Sentinel hosts
* Add `--all` option to the `messenger:failed:remove` command
* Add `WrappedExceptionsInterface` interface for exceptions that hold multiple individual exceptions
* Deprecate `HandlerFailedException::getNestedExceptions()`, `HandlerFailedException::getNestedExceptionsOfClass()`
and `DelayedMessageHandlingException::getExceptions()` which are replaced by a new `getWrappedExceptions()` method
6.3
---
* Add support for namespace wildcards in the HandlersLocator to allow routing multiple messages within the same namespace
* Deprecate `Symfony\Component\Messenger\Transport\InMemoryTransport` and
`Symfony\Component\Messenger\Transport\InMemoryTransportFactory` in favor of
`Symfony\Component\Messenger\Transport\InMemory\InMemoryTransport` and
`Symfony\Component\Messenger\Transport\InMemory\InMemoryTransportFactory`
* Allow passing a string instead of an array in `TransportNamesStamp`
* Allow to define batch size when using `BatchHandlerTrait` with `getBatchSize()`
* Deprecate `StopWorkerOnSigtermSignalListener` in favor of
`StopWorkerOnSignalsListener` and make it configurable with SIGINT and
SIGTERM by default
* Add `RedispatchMessage` and `RedispatchMessageHandler`
* Add optional parameter `$isSameDatabase` to `DoctrineTransport::configureSchema()`
6.2
---
* Add new `messenger:stats` command that returns a list of transports with their "to be processed" message count
* Add `TransportNamesStamp` to change the transport while dispatching a message
* Add support for rate limited transports by using the RateLimiter component.
* Deprecate `MessageHandlerInterface` and `MessageSubscriberInterface`, use `#[AsMessageHandler]` instead
* Add new parameter `allowNoSenders` to `SendMessageMiddleware` to enable throwing when a message doesn't have a sender
6.1
---
* Add `SerializedMessageStamp` to avoid serializing a message when a retry occurs
* Automatically resolve handled message type when method different from `__invoke` is used as handler
* Allow `#[AsMessageHandler]` attribute on methods
6.0
---
* Remove deprecated classes `Symfony/Component/Messenger/Transport/AmqpExt`, `Symfony/Component/Messenger/Transport/Doctrine` and `Symfony/Component/Messenger/Transport/Redis`.
* Class `MessengerPass` cannot be configured with constructor arguments
* Remove constructor arguments and getters for `RedeliveryStamp`'s properties `exceptionMessage` and `flattenException`
5.4
---
* Add `AsMessageHandler` attribute for declaring message handlers on PHP 8.
* Add support for handling messages in batches with `BatchHandlerInterface` and corresponding trait
* Add `StopWorkerExceptionInterface` and its implementation `StopWorkerException` to stop the worker.
* Add support for resetting container services after each messenger message.
* Added `WorkerMetadata` class which allows you to access the configuration details of a worker, like `queueNames` and `transportNames` it consumes from.
* New method `getMetadata()` was added to `Worker` class which returns the `WorkerMetadata` object.
* Deprecate not setting the `reset_on_message` config option, its default value will change to `true` in 6.0
* Add log when worker should stop.
* Add log when `SIGTERM` is received.
* Add `--stats` and `--class-filter` options to `FailedMessagesShowCommand`
5.3
---
* Add the `RouterContextMiddleware` to restore the original router context when handling a message
* `InMemoryTransport` can perform message serialization through dsn `in-memory://?serialize=true`.
* Added `queues` option to `Worker` to only fetch messages from a specific queue from a receiver implementing `QueueReceiverInterface`.
5.2.0
-----
* The `RedeliveryStamp` will no longer be populated with error data. This information is now stored in the `ErrorDetailsStamp` instead.
* Added `FlattenExceptionNormalizer` to give more information about the exception on Messenger background processes. The `FlattenExceptionNormalizer` has a higher priority than `ProblemNormalizer` and it is only used when the Messenger serialization context is set.
* Added factory methods `DelayStamp::delayFor(\DateInterval)` and `DelayStamp::delayUntil(\DateTimeInterface)`.
* Removed the exception when dispatching a message with a `DispatchAfterCurrentBusStamp` and not in a context of another dispatch call
* Added `WorkerMessageRetriedEvent`
5.1.0
-----
* Moved AmqpExt transport to package `symfony/amqp-messenger`. All classes in `Symfony\Component\Messenger\Transport\AmqpExt` have been moved to `Symfony\Component\Messenger\Bridge\Amqp\Transport`
* Moved Doctrine transport to package `symfony/doctrine-messenger`. All classes in `Symfony\Component\Messenger\Transport\Doctrine` have been moved to `Symfony\Component\Messenger\Bridge\Doctrine\Transport`
* Moved RedisExt transport to package `symfony/redis-messenger`. All classes in `Symfony\Component\Messenger\Transport\RedisExt` have been moved to `Symfony\Component\Messenger\Bridge\Redis\Transport`
* Added support for passing a `\Throwable` argument to `RetryStrategyInterface` methods. This allows to define strategies based on the reason of the handling failure.
* Added `StopWorkerOnFailureLimitListener` to stop the worker after a specified amount of failed messages is reached.
* Added `RecoverableExceptionInterface` interface to force retry.
5.0.0
-----
* The `LoggingMiddleware` class has been removed, pass a logger to `SendMessageMiddleware` instead.
* made `SendersLocator` require a `ContainerInterface` as 2nd argument
4.4.0
-----
* Added support for auto trimming of Redis streams.
* `InMemoryTransport` handle acknowledged and rejected messages.
* Made all dispatched worker event classes final.
* Added support for `from_transport` attribute on `messenger.message_handler` tag.
* Added support for passing `dbindex` as a query parameter to the redis transport DSN.
* Added `WorkerStartedEvent` and `WorkerRunningEvent`
* [BC BREAK] Removed `SendersLocatorInterface::getSenderByAlias` added in 4.3.
* [BC BREAK] Removed `$retryStrategies` argument from `Worker::__construct`.
* [BC BREAK] Changed arguments of `ConsumeMessagesCommand::__construct`.
* [BC BREAK] Removed `$senderClassOrAlias` argument from `RedeliveryStamp::__construct`.
* [BC BREAK] Removed `UnknownSenderException`.
* [BC BREAK] Removed `WorkerInterface`.
* [BC BREAK] Removed `$onHandledCallback` of `Worker::run(array $options = [], callable $onHandledCallback = null)`.
* [BC BREAK] Removed `StopWhenMemoryUsageIsExceededWorker` in favor of `StopWorkerOnMemoryLimitListener`.
* [BC BREAK] Removed `StopWhenMessageCountIsExceededWorker` in favor of `StopWorkerOnMessageLimitListener`.
* [BC BREAK] Removed `StopWhenTimeLimitIsReachedWorker` in favor of `StopWorkerOnTimeLimitListener`.
* [BC BREAK] Removed `StopWhenRestartSignalIsReceived` in favor of `StopWorkerOnRestartSignalListener`.
* The component is not marked as `@experimental` anymore.
* Marked the `MessengerDataCollector` class as `@final`.
* Added support for `DelayStamp` to the `redis` transport.
4.3.0
-----
* Added `NonSendableStampInterface` that a stamp can implement if
it should not be sent to a transport. Transport serializers
must now check for these stamps and not encode them.
* [BC BREAK] `SendersLocatorInterface` has an additional method:
`getSenderByAlias()`.
* Removed argument `?bool &$handle = false` from `SendersLocatorInterface::getSenders`
* A new `ListableReceiverInterface` was added, which a receiver
can implement (when applicable) to enable listing and fetching
individual messages by id (used in the new "Failed Messages" commands).
* Both `SenderInterface::send()` and `ReceiverInterface::get()`
should now (when applicable) add a `TransportMessageIdStamp`.
* Added `WorkerStoppedEvent` dispatched when a worker is stopped.
* Added optional `MessageCountAwareInterface` that receivers can implement
to give information about how many messages are waiting to be processed.
* [BC BREAK] The `Envelope::__construct()` signature changed:
you can no longer pass an unlimited number of stamps as the second,
third, fourth, arguments etc: stamps are now an array passed to the
second argument.
* [BC BREAK] The `MessageBusInterface::dispatch()` signature changed:
a second argument `array $stamps = []` was added.
* Added new `messenger:stop-workers` command that sends a signal
to stop all `messenger:consume` workers.
* [BC BREAK] The `TransportFactoryInterface::createTransport()` signature
changed: a required 3rd `SerializerInterface` argument was added.
* Added a new `SyncTransport` to explicitly handle messages synchronously.
* Added `AmqpStamp` allowing to provide a routing key, flags and attributes on message publishing.
* [BC BREAK] Removed publishing with a `routing_key` option from queue configuration, for
AMQP. Use exchange `default_publish_routing_key` or `AmqpStamp` instead.
* [BC BREAK] Changed the `queue` option in the AMQP transport DSN to be `queues[name]`. You can
therefore name the queue but also configure `binding_keys`, `flags` and `arguments`.
* [BC BREAK] The methods `get`, `ack`, `nack` and `queue` of the AMQP `Connection`
have a new argument: the queue name.
* Added optional parameter `prefetch_count` in connection configuration,
to setup channel prefetch count.
* New classes: `RoutableMessageBus`, `AddBusNameStampMiddleware`
and `BusNameStamp` were added, which allow you to add a bus identifier
to the `Envelope` then find the correct bus when receiving from
the transport. See `ConsumeMessagesCommand`.
* The optional `$busNames` constructor argument of the class `ConsumeMessagesCommand` was removed.
* [BC BREAK] 3 new methods were added to `ReceiverInterface`:
`ack()`, `reject()` and `get()`. The methods `receive()`
and `stop()` were removed.
* [BC BREAK] Error handling was moved from the receivers into
`Worker`. Implementations of `ReceiverInterface::handle()`
should now allow all exceptions to be thrown, except for transport
exceptions. They should also not retry (e.g. if there's a queue,
remove from the queue) if there is a problem decoding the message.
* [BC BREAK] `RejectMessageExceptionInterface` was removed and replaced
by `Symfony\Component\Messenger\Exception\UnrecoverableMessageHandlingException`,
which has the same behavior: a message will not be retried
* The default command name for `ConsumeMessagesCommand` was
changed from `messenger:consume-messages` to `messenger:consume`
* `ConsumeMessagesCommand` has two new optional constructor arguments
* [BC BREAK] The first argument to Worker changed from a single
`ReceiverInterface` to an array of `ReceiverInterface`.
* `Worker` has 3 new optional constructor arguments.
* The `Worker` class now handles calling `pcntl_signal_dispatch()` the
receiver no longer needs to call this.
* The `AmqpSender` will now retry messages using a dead-letter exchange
and delayed queues, instead of retrying via `nack()`
* Senders now receive the `Envelope` with the `SentStamp` on it. Previously,
the `Envelope` was passed to the sender and *then* the `SentStamp`
was added.
* `SerializerInterface` implementations should now throw a
`Symfony\Component\Messenger\Exception\MessageDecodingFailedException`
if `decode()` fails for any reason.
* [BC BREAK] The default `Serializer` will now throw a
`MessageDecodingFailedException` if `decode()` fails, instead
of the underlying exceptions from the Serializer component.
* Added `PhpSerializer` which uses PHP's native `serialize()` and
`unserialize()` to serialize messages to a transport
* [BC BREAK] If no serializer were passed, the default serializer
changed from `Serializer` to `PhpSerializer` inside `AmqpReceiver`,
`AmqpSender`, `AmqpTransport` and `AmqpTransportFactory`.
* Added `TransportException` to mark an exception transport-related
* [BC BREAK] If listening to exceptions while using `AmqpSender` or `AmqpReceiver`, `\AMQPException` is
no longer thrown in favor of `TransportException`.
* Deprecated `LoggingMiddleware`, pass a logger to `SendMessageMiddleware` instead.
* [BC BREAK] `Connection::__construct()` and `Connection::fromDsn()`
both no longer have `$isDebug` arguments.
* [BC BREAK] The Amqp Transport now automatically sets up the exchanges
and queues by default. Previously, this was done when in "debug" mode
only. Pass the `auto_setup` connection option to control this.
* Added a `SetupTransportsCommand` command to setup the transports
* Added a Doctrine transport. For example, use the `doctrine://default` DSN (this uses the `default` Doctrine entity manager)
* [BC BREAK] The `getConnectionConfiguration` method on Amqp's `Connection` has been removed.
* [BC BREAK] A `HandlerFailedException` exception will be thrown if one or more handler fails.
* [BC BREAK] The `HandlersLocationInterface::getHandlers` method needs to return `HandlerDescriptor`
instances instead of callables.
* [BC BREAK] The `HandledStamp` stamp has changed: `handlerAlias` has been renamed to `handlerName`,
`getCallableName` has been removed and its constructor only has 2 arguments now.
* [BC BREAK] The `ReceivedStamp` needs to exposes the name of the transport from which the message
has been received.
4.2.0
-----
* Added `HandleTrait` leveraging a message bus instance to return a single
synchronous message handling result
* Added `HandledStamp` & `SentStamp` stamps
* All the changes below are BC BREAKS
* Senders and handlers subscribing to parent interfaces now receive *all* matching messages, wildcard included
* `MessageBusInterface::dispatch()`, `MiddlewareInterface::handle()` and `SenderInterface::send()` return `Envelope`
* `MiddlewareInterface::handle()` now require an `Envelope` as first argument and a `StackInterface` as second
* `EnvelopeAwareInterface` has been removed
* The signature of `Amqp*` classes changed to take a `Connection` as a first argument and an optional
`Serializer` as a second argument.
* `MessageSubscriberInterface::getHandledMessages()` return value has changed. The value of an array item
needs to be an associative array or the method name.
* `StampInterface` replaces `EnvelopeItemInterface` and doesn't extend `Serializable` anymore
* The `ConsumeMessagesCommand` class now takes an instance of `Psr\Container\ContainerInterface`
as first constructor argument
* The `EncoderInterface` and `DecoderInterface` have been replaced by a unified `Symfony\Component\Messenger\Transport\Serialization\SerializerInterface`.
* Renamed `EnvelopeItemInterface` to `StampInterface`
* `Envelope`'s constructor and `with()` method now accept `StampInterface` objects as variadic parameters
* Renamed and moved `ReceivedMessage`, `ValidationConfiguration` and `SerializerConfiguration` in the `Stamp` namespace
* Removed the `WrapIntoReceivedMessage` class
* `MessengerDataCollector::getMessages()` returns an iterable, not just an array anymore
* `HandlerLocatorInterface::resolve()` has been removed, use `HandlersLocator::getHandlers()` instead
* `SenderLocatorInterface::getSenderForMessage()` has been removed, use `SendersLocator::getSenders()` instead
* Classes in the `Middleware\Enhancers` sub-namespace have been moved to the `Middleware` one
* Classes in the `Asynchronous\Routing` sub-namespace have been moved to the `Transport\Sender\Locator` sub-namespace
* The `Asynchronous/Middleware/SendMessageMiddleware` class has been moved to the `Middleware` namespace
* `SenderInterface` has been moved to the `Transport\Sender` sub-namespace
* The `ChainHandler` and `ChainSender` classes have been removed
* `ReceiverInterface` and its implementations have been moved to the `Transport\Receiver` sub-namespace
* `ActivationMiddlewareDecorator` has been renamed `ActivationMiddleware`
* `AllowNoHandlerMiddleware` has been removed in favor of a new constructor argument on `HandleMessageMiddleware`
* The `ContainerHandlerLocator`, `AbstractHandlerLocator`, `SenderLocator` and `AbstractSenderLocator` classes have been removed
* `Envelope::all()` takes a new optional `$stampFqcn` argument and returns the stamps for the specified FQCN, or all stamps by their class name
* `Envelope::get()` has been renamed `Envelope::last()`
4.1.0
-----
* Introduced the component as experimental